Compact 2-Way Loud Speaker
The Control® 28-1L is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
Features
- 8” woofer with woven fiberglass cone
- 1” PEI diaphragm tweeter with fluid cooling
- Contemporary, high-design appearance
- Built-in InvisiBall® mounting hardware, plus available U-bracket
- Weather-resistant enclosure and transducers
- Wide 100° x 100° coverage
- 120 Watt power handling (240 Watt program)
- High fidelity sound character with broad frequency response of 45 Hz – 20 kHz.
| System |
|---|
| Frequency Range (-10 dB): | 45 Hz – 20 kHz |
|---|
| Frequency Response (±3 dB): | 62 Hz – 16 kHz |
|---|
| Power Rating | 240W Continuous Program (2 hrs) |
|---|
| 120W (480W peak), Continuous Pink Noise (2 hrs) |
| 90W (360W peak) Continuous Pink Noise (100 hrs) |
| Maximum Input Voltage: | 27.5 V RMS (2 hrs), 55.0 V peak |
|---|
| Maximum SPL: | 112 dB ave. Continuous Pink Noise (118 dB peak) |
|---|
| Sensitivity: | 91 dB, 1W/1m (ave. 100 Hz – 10 kHz) |
|---|
| Coverage Angle: | 100° x 100° |
|---|
| Directivity Factor (Q) : | 7.3 (averaged 1kHz – 16kHz) |
|---|
| Directivity Index (DI) : | 8.3dB (averaged 1kHz – 16kHz) |
|---|
| Nominal Impedance: | 8 ohms (THRU setting) |
|---|
| Crossover Type: | 2nd order low-pass, 1st order high-pass, plus conjugate shaping |
|---|
| Circuitry |
|---|
| Transformer Taps: | 70V: 60W, 30W, 15W, 7.5W |
|---|
| 100V: 60W, 30W, 15W |
| Insertion Loss: <0.94 dB at any tap setting |
| Thru Setting: 8 ohms nominal |
| Recommended Protective High-Pass: | 45 Hz high-pass (24 dB/oct) for 8? operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap |
|---|
| Transducers |
|---|
| Low Frequency: | 200 mm (8 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure |
|---|
| High Frequency: | 25 mm (1 in) PEI diaphragm, low-viscosity ferromagnetic fluid, and lightweight Kapton™ voice coil former |
|---|
| Physical |
|---|
| Enclosure Material: | High Impact Polystyrene (HIPS) with 10% glass fill, painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance |
|---|
| Grille: | Highly zinc-plated, finished in durable TGIC polyester powder coating. MTC-28WMG-1 (&-WH) available with Weather-Max™ multi-layer foam and tight-weave mesh vapor barrier backing. |
|---|
| Installation: | InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-28WMG-1 (&-WH) U-bracket. Secondary safety attachment loop point on back pane. |
|---|
| Environmental: | IP-44 per IEC529 (IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC28WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.. |
|---|
| Termination: | Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection |
|---|
| Agency Rating: | ROHS-compliant; Transformer UL Recognized per UL1876 |
|---|
| Shipping Info |
|---|
| Colors: | Black (RAL9004) or white (-WH, RAL9016) |
|---|
| Dimensions (H x W x D): | 386 x 282 x 219 mm (15.2 x 11.1 x 8.6 in); 277mm (10.9 in) |
|---|
| Net Weight: | 6.8 kg (15.0 lbs) |
|---|
| Shipping Weight: | 15.4 kg (34 lbs) pair-packed (for 2 speakers) |
|---|
| Included Accessories: | InvisiBall™ wall-mounting system), 6 mm x 180mm hex key |
|---|
-1280x854.jpg)
-1280x854.jpg)
-74x74.jpg)
-74x74.jpg)
